Danh mục sản phẩm
SẢN PHẨM MỚI
THIẾT BỊ ĐO KIỂM TRA ẮC QUY VÀ PIN BT3563A
THIẾT BỊ ĐO KIỂM TRA ẮC QUY VÀ PIN BT3562A
Thiết bị đo nội trở Ắc quy BT3554-50
Ampe kìm đo dòng rò Hioki CM4001
Đồng hồ đo điện vạn năng DT4224
Đông hồ vạn năng DT4223
Thiết bị đo nội trở Ắc quy
CM4374-Ampe kìm đa năng
CM4372 Ampe kìm đa năng Hioki
FT3424 Đo cường độ ánh sáng
DT4255-Đồng hồ đa năng
DT4256 - Đồng hồ vạn năng
CM4373 Ampe kìm đa năng
CM4371 Ampe kìm đa năng
Tìm kiếm sản phẩm
Hổ trợ trực tuyến
![Sales01 - 0917047888](https://drive.gianhangvn.com/image/zalo.png)
Sales01 - 0917047888
![Sales02 - 0902006658](https://drive.gianhangvn.com/image/zalo.png)
Sales02 - 0902006658
![Support](https://drive.gianhangvn.com/image/skype.png)
Support
Fanpage Facebook
Liên kết website
Thống kê
- Đang online 0
- Hôm nay 0
- Hôm qua 0
- Trong tuần 0
- Trong tháng 0
- Tổng cộng 0
NON-CONTACT AC VOLTAGE PROBE SP3000
SP3000
HIOKI - Nhat Ban
12 tháng
Liên hệ để có giá tốt nhất 0917047888
The SP3000 is a non-contact AC voltage waveform probe ideal for maintenance applications involving device control signals and sensor signals. Simply apply the probe to a cable outside its insulation cover to capture the signal without exposing the technician to electrocution. Key Features • Observe waveforms with an oscilloscope or a Hioki Memory HiCorder by visualizing signals from electric equipment simply by applying the probe to the wire’s insulation • Capture LIN and other communications signals • Measure signals from electric equipment on vehicles • Ideal for applications where: - Miniaturization of devices and use of waterproof connectors make it impossible to establish contact with metal terminals - Connectors can’t be removed due to reduced ability to reproduce phenomena - There is need to avoid tearing the wire insulation so as to prevent risk of damage to the sensor due to static electricity
A comment from the Good Design Award 2017
“First, this award recognizes Hioki’s proprietary no-metal-contact measurement technology, which allows measurement of voltage waveforms from outside a wire’s insulation, without any need to make contact with a metal terminal. Further, it recognizes the product’s technology and design, for example in terms of the implementation of that technology in an instrument that can be applied to wires single-handedly in confined locations and designers’ success in creating a small, hands-free probe that need not be supported by the end-user.”
Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)[Head of probe] AC VOLTAGE PROBE SP9001
Measurement method | Capacitive-coupled current cancellation (not suitable for use with bare conductors) |
---|---|
Measurable wire type | Insulated wire |
Maximum input voltage | RMS : 30 Vrms or less, Peak : 42.4 Vpeak or less |
Dimensions and mass | 15.0 mm (0.59 in) W × 13.9 mm (0.55 in) H × 77.4 mm (3.05 in) D mm, 52 g (1.83 oz) (including cable) |
[Main body measuring circuit] NON-CONTACT AC VOLTAGE PROBE SP3000
Rated measurement voltage | 5 V rms (14.14 Vp-p) |
---|---|
Output rate | 1 V/V |
Rising time | 4.5 μs or less |
Frequency band | 10 Hz to 100 kHz (-3 dB) |
Voltage measurement precision | ±2.5% rdg. ±1% f.s. (0.5 Vrms to 5 Vrms) |
Effects of wire under measurement | ±5% rdg. (Finished outer diameter φ1.0 to 2.5 mm, in a wire rod in conformity with UL1007, UL1015, AV, AVS, AVSS) |
Power supply | (1)USB bus power: USB mini receptacle: 5 V ±0.25 V DC (2)AC Adapter Z1013: 5 V DC, 2.6 A Rated supply voltage: 100 V to 240 V AC (50 Hz/60 Hz) |
Output terminal | Insulated BNC (Measuring device connection side), Output resistance : 50 Ω |
Dimensions and mass | 120 mm (4.72 in) W × 25 mm (0.98 in) H × 55 mm (2.16 in) D, 160 g (5.64 oz) (including cable) |
Accessories | Ground connection cable (1.5 m) ×1, Alligator clip ×1, USB cable ×1, Instruction manual ×1 |
Options
Also sold separately
Options
9804-02 can be used by being attached to the tip of the GND connection cable included in SP3000
Bình luận
Sản phẩm cùng loại